Originally published on Medium.
Seventy-one data points, but carbon footprint and due diligence are not among them yet. The registry is already open.

On 18 February 2027, an EV battery, a light-means-of-transport battery or an industrial battery over 2 kWh cannot be placed on the EU market without a passport registered in a Commission database. That is ninety-two days. The database has been open since July.
This piece is for the person who has to deliver that. It is not about anybody getting caught. It is a read of what the Commission has actually published, what it has not published yet, and which items in it have a lead time longer than the time remaining.
What is required on the day
The Commission’s guidance is called “Guidance to support preparations for the Digital Batteries Passport,” published by DG GROW on 21 August 2026, with the underlying document, “Digital Batteries Passport: data points by category,” now at version 3.2 and last updated on 19 October.
It sets out 71 data points across EV, light-means-of-transport and industrial batteries. Each one is marked as mandatory, optional, conditional, or not required as of February 2027. That last category is the most useful column in the document and the one worth reading first.
One caution the guidance puts on itself, and it belongs in your project plan rather than a footnote: it “does not introduce additional legal requirements and should not be regarded as an authoritative interpretation.” It is the Commission helping you prepare. It is not the law, and the law is Regulation (EU) 2023/1542.
On scope, the Commission’s own pages describe it two ways, and they reconcile once you read the definitions. The news item says EV, LMT and industrial batteries over 2 kWh. The battery page says EV, e-bikes, e-mopeds, e-scooters, home storage and industrial. Those are the same set: an e-scooter battery is a light means of transport battery, and the Regulation treats batteries for energy storage in private or domestic environments as industrial.
The three things not required in February
This is the part most likely to change what you do this quarter, and it runs the other way from the usual deadline panic.
Per the Commission’s battery FAQ, carbon footprint, recycled content and due diligence fields are not required from February 2027. The due diligence report applies from August 2027, six months later.
Those three are the hardest data to assemble, because they reach back up a supply chain you do not control. If your programme has been sequenced around them, it has been sequenced around the wrong things, and there are ninety-two days in which that matters.
The implementing acts setting the carbon footprint declaration format are, in any case, still to come.
Who has to do it
The obligation sits with the economic operator placing the battery on the EU market or putting it into service. That operator registers the passport.
A non-EU operator can create an account, but for batteries the registration itself has to be done by whoever places the battery on the EU market. If you manufacture outside the EU and sell through an importer, the registration is the importer’s act and the importer’s liability, which is a conversation worth having before February rather than in March.
Article 77(4) of the Batteries Regulation allows a written authorisation for a third party to create or update the passport on your behalf. The legal responsibility does not move. It stays with the operator placing the battery on the market, whoever does the typing.
The item with the longest lead time
Here is the one that is not in most project plans.
You cannot register anything until your organisation is verified, and verification is not a form. An organisation verifies with a qualified electronic seal under eIDAS, or by evidencing identity and establishment through a qualified electronic attestation of attributes. A sole trader or natural person uses a qualified electronic signature or an eID at the ‘high’ assurance level.
A qualified electronic seal is issued by a qualified trust service provider, and obtaining one involves identity verification of the legal entity and its representatives. It is not something you complete on a Thursday afternoon.
Verification then lasts up to three years, so it is a one-off, but it is a one-off that sits in front of everything else. If nobody in your organisation has started it, that is the first item, not the data model.
Enrolment is open now at the Commission’s registry, and there is a separate test environment that takes its own EU login and touches no live data. The Commission runs a helpdesk at [email protected] and on +32 2 296 0431, between 08:00 and 20:00 CET. There is a fourth battery passport webinar on 26 November.
There is no deadline to pre-register. The obligation is that the passport is registered before the battery is placed on the market, which for a product you ship continuously means the capability has to exist before February rather than the entries.
What is still missing, with ninety-two days to go
An honest reading of the Commission’s own material shows three things that are not finished.
The access-rights implementing act for batteries has not been adopted. This is the act that determines which data is public, which goes to persons with a legitimate interest such as repairers, remanufacturers and recyclers, and which is restricted to notified bodies, market surveillance authorities and the Commission. The FAQ indicated a draft was expected for feedback in October or November. We could not find a published draft. The Regulation’s recitals describe the architecture, including that test report results should reach only notified bodies, market surveillance authorities and the Commission, but the operative instrument is not law yet.
Two of the eight harmonised standards are outstanding. Six have been published, and the Commission’s own timeline put an implementing decision on the remaining two in November 2026. We could not confirm it has happened.
And there is an unresolved point about who mints the identifier. The general digital product passport page says the registry generates a unique URI. The battery FAQ says economic operators can create identifiers locally using options in the relevant standards, or use a commercial service. Those are different answers to an architectural question, and if you are building the integration you need the real one. It is a helpdesk question.
A correction to our own reporting
On 17 November we wrote that customs can verify electronically that an imported product has a valid registered passport before release for free circulation. That is the Commission’s general statement about digital product passports and we reported it as such.
For batteries specifically, the FAQ says something different: the passport’s unique registration identifier “shall not be entered into the electronic customs declaration.” The passport must still be registered. It is simply not a field in the declaration.
The FAQ also says dynamic fields can be empty at import and the passport can still be registered, which matters for anyone importing cells and completing data later.
We were not wrong about the general rule, and we should have checked the battery-specific FAQ before applying it to batteries. Corrected here.
What it would have cost with unit-level identity
The registry entry is not the hard part. Enrolment is a week of somebody’s attention and a trust service provider’s invoice.
The hard part is that this is a record per battery. Seventy-one data points attached to an individual unit, resolvable from a QR code on that unit, maintained after it leaves you. Some of it is static and some is not: the Regulation contemplates read-only access to battery management system data for state of health and expected lifetime, updated at least daily. That is not a document you produce once. It is a live record keyed to a serial number for the service life of the battery.
Most firms approaching February are trying to build that out of an ERP extract and a spreadsheet, because the deadline reads like a reporting obligation. It is not a reporting obligation. It is a per-unit identity with a data pipeline behind it, and the organisations that already assign and resolve a unique identity per unit are doing a data-mapping exercise, while the ones that do not are building the identity layer and the passport at the same time, in ninety-two days.
Which is the useful question to ask yourself this week: when a regulator, a recycler or a buyer scans one battery that left your plant eighteen months ago, what resolves, and who keeps it current? If you want to know what your records could answer today, the recall width assessment takes three minutes and collects nothing: https://claude.ai/artifact/BTXR16P7uGbA56i4t2PFMg
The Regulation does not require NFC, and a QR code satisfies it. We also do not generate the battery data; your battery management system does.
What we are not saying
We are not saying the deadline will move. It is in a regulation in force, not a proposal, and nothing we read suggests a delay. But the ESPR textile and iron and steel timetables have already shifted and an access-rights act is still unadopted, so a reader planning capital spend should watch the Official Journal rather than take our word for it.
We are not stating the penalty for non-compliance, because the Commission’s pages do not. The Batteries Regulation leaves penalties to Member States, which are to make them effective, proportionate and dissuasive. The practical consequence on 18 February is about market access rather than a fine: a battery without a registered passport cannot lawfully be placed on the market.
And we could not read Article 77 itself. EUR-Lex served us the recitals and the first three articles of Regulation (EU) 2023/1542 and then truncated, across five attempts at different offsets. Everything here about the operative requirement comes from the Commission’s own guidance, battery page and FAQ, plus the Regulation’s recitals, which are interpretive rather than binding. Before you commit a budget, read Article 77 and Annex XIII in the Official Journal.
Aeroz tracks counterfeit enforcement, recalls and supply chain failures in regulated industries, three times a week. Follow for the next one. aeroz.io · [email protected]
